CONCORD Eye-Q Go Wireless Quick Start Manual page 7

INSTALLING THE SOFTWARE FOR THE USB BLUETOOTH WIRELESS ADAPTOR
INSTALLING THE SOFTWARE FOR THE USB BLUETOOTH
WIRELESS ADAPTOR
Do not plug the USB Bluetooth Wireless Adaptor into the computer before
!
installing the driver.
1. Insert the Bluetooth Adaptor Installation Disk into your computer's CD-ROM
drive.
2. The installation screen will appear, click on Install Adaptor Drivers.
3. Follow the on-screen instructions to complete the installation.
Note: For more detailed instructions on installation, please refer to the USB
Bluetooth Wireless Adaptor Installation Guide in the hard copy of the User's
Guide or the electronic version found in the PC Installation Disk and the
Bluetooth Adaptor Installation Disk.
This software is necessary to add Bluetooth functionality to your PC.
TRANSFERRING PICTURES TO THE COMPUTER WITH
BLUETOOTH
1. Make sure that your computer is on and that
Windows is running.
2. Power on your camera.
3. Remove the cap on the USB Bluetooth
Wireless Adaptor. (fig.1.1)
4. Plug the USB Bluetooth Wireless Adaptor into the
USB port located in the back or front of your
computer. (fig.1.2)
• Keep a distance of no more than 30 feet (10
meters) between the camera and the USB
Bluetooth Wireless Adaptor (2 meters is
recommended).
fig.1.1
5
fig.1.2