CONCORD Eye-Q Fun.Cam User Manual page 16

Please follow the steps below to transfer pictures from the camera to your
PC imaging application:
1) The camera will transfer pictures into the thumbnails once the TWAIN
driver is started. The camera icon will blink whenever there is
interaction between the camera and your PC.
2) You can preview the pictures in thumbnails. If more than 20 pictures
are transferred, click the Page Up or Page Down button to go to the
thumbnail page that you need.
3) You can select pictures to transfer from the thumbnails as follows:
a. To select a picture to transfer, simply click on its thumbnail. The
thumbnail of the selected picture will be highlighted.
b. To select all pictures, simply click the Select All button.
c. To select multiple pictures, press and hold the Ctrl key and click at
the same time on the thumbnail of the required picture. Repeat this
until you select all the pictures that you need.
d. To select a range of pictures, click on the thumbnail of the first
picture that you need, then press and hold the Shift key and click at
the same time on the thumbnail of the last picture that you need.
4) After selecting the pictures, click the Capture button to start
transferring pictures to your PC imaging application.
5) To make a video clip in AVI format, click the AVI button. The following
section will provide more details.
6) If you need help on the usage of the TWAIN driver, click on the Help
button.
7) If you want to exit the TWAIN driver, click the Exit Button.
TRANSFERRING PICTURES
15