Flash Settings; Anti-Flickering Settings; Capture Modes - CONCORD Eye-Q Fun.Cam User Manual

Flash settings

6a. You can press the shutter button to enter automatic flash
mode when you see this display. The flash icon will blink
until the flash is fully charged. In this mode, the flash
will fire automatically when you take a picture under low
light conditions.
6b. To disable the automatic flash, press the Shutter button
when you see the screen in the LCD. The flash icon will
be switched off if you select this mode.

Anti-flickering settings

7. In this mode, the camera will minimize the picture
bandings caused by 60Hz fluorescent lighting (in
countries such as USA and Japan).
8. In this mode, the camera will minimize the picture
bandings caused by 50Hz fluorescent lighting (in
countries such as UK and Australia).

Capture Modes

9. Single capture mode. In this mode, the camera will take
one picture per shutter click.
10. Continuous capture mode. In this mode, the camera will
take pictures continuously once the shutter button is
pressed. Press the shutter button again to stop taking
pictures. The flash will be disabled in this mode.
11. Self-timer mode. In this mode, the camera will take a
picture 10 seconds after the shutter button is pressed.
While the timer is running, the camera will emit 8
seconds of slow beeps followed by 2 seconds of fast
beeps.
OPERATING MODES
10