Using The Self-Timer; Recording Video Clips (D8) - CONCORD Eye-Q Easy Too User Manual

Self-Timer
Press the Feature Button until 'St' appears in
St
the LCD. Press the Shutter button to start a
10-second self-timer count down. The camera
will issue a series of short beeps followed by
a long beep. When the image has been
captured, the camera will beep again.
'St" – self-timer mode
Note: A high tone beep indicates that the picture was captured while
a low tone beep indicates that there is insufficient lighting and the
picture was not taken.
Video Clips
Press the Feature Button until 'd8' appears in
d8
the LCD. Press and hold the shutter button
to record video clips. The camera will record
video clips as long as the shutter button is
pressed or until the memory is full.
Note: The camera is designed to record video clips regardless of the
lighting conditions. Pay special attention to the light conditions
while in this mode to optimize image quality.
11