Earthsafe M500 Installation, Operation And Maintenance Manual page 6

INSTALLATION, OPERATION, AND MAINTENANCE
RETURN FLOW PUMP
7
CONTROL PANEL
4
1
PRIMARY STEEL TANK
2
CONTAINMENT TANK
NOT SHOWN IN
PHOTO PERSPECTIVE
6. Inlet Valve Assembly
8. Engine Inlet and Outlet
9. Standard Vent
10. Emergency Vent
11. Direct Read Gauge
12. Inspection Port
13. Leak Sensor
PUMP MOTOR
5
STARTER
3
PANEL BRACKET
EMERGENCY POWER FUEL SYSTEMS
Physical Description
1. Primary Fuel Tank: UL 142 Steel Tank
2. Containment: Rated welded steel containment
basin – double wall tank
3. Control panel support: Support for OmniPlex
Controller and pump motor starter panels
4. Control Panel: PLC based control panel
5. Motor Starter: Motor starter for return flow pump
6. Inlet Valve Assembly: Inlet solenoid valves,
manual valves, and strainers.
7. Pump and Motor for Return Flow:
Viking positive displacement pump
8. Engine Inlet and Outlet: Suction pipe on
engine supply
9. Standard Vent: 2" tank opening
10. Emergency Vent: 4-6" tank opening
11. Direct Read Gauge
12. Inspection Port
13. Leak Sensor
Earthsafe M500
Generator Day Tank
6 of 15
earth safe
Fuel Systems for Critical Power