: Push annular buffer into the
engine housing until its groove
(arrow) engages over the
housing rib.
Install all other parts in the reverse
sequence.
MS 290, MS 310, MS 390
9.3.3
Front Handle/Engine
Housing
– Remove the chain sprocket
cover, b 5.1
– Remove the front handle, b 9.1
: Push the annular buffer inwards
and remove.
Install in the reverse sequence.
– Coat the new annular buffer with
STIHL Press Fluid OH 723,
b 13.
: Push the annular buffer into the
engine housing from the inside so
that its groove (arrow) engages
over the housing rib.
Install all other parts in the reverse
sequence.
57