1
: Use press sleeve (1)
1127 893 2400 to install the
"soft" oil seal.
– Wait about one minute, then
rotate the crankshaft.
– Install the flywheel, b 7.3
Install all other parts in the reverse
sequence.
MS 290, MS 310, MS 390
6.4
Shroud
1
2
3
: Pull off the spark plug boot (1).
: Pull the ignition lead (3) out of the
retainer (2) and guides (arrows).
: Take out the screws (arrows).
: Lift the shroud (1) up a little and
remove it to the rear.
1
: If necessary, unclip the
shutter (1).
Install in the reverse sequence.
2
1
Machines up to 2001
: Push the tank vent (1) into its seat
(arrow) in the shroud (2).
1
29