Tennsco BK6-121512-3 Assembly Instructions/Parts Manual

Tennsco BK6-121512-3 Assembly Instructions/Parts Manual

Unassembled box lockers three wide unit

Advertisement

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
Tennsco box lockers are designed for use in
schools, hospitals, businesses, and institutions
where space is limited. They are highly suitable
for securing small personal items such as books,
shoes, purses, etc. Five or six tier, single and
three wide units are available in 12" and 15"
widths and 12", 15" and 18" depths with or
without legs.

Basic Construction:

All models are constructed of 16 gauge steel frames
and doors and 24 gauge body components. Doors
are louvered for ventilation. Heavy gauge steel
construction with baked-on powder coat finish
assures you years of trouble-free service, even under
the most demanding situations. Each door has a
finger tab pull with a built-in padlock hasp. Optional
built-in key locks or combination locks may be
installed. Other options available are front bases, end
bases and sloping tops.

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be
taken when handling various pieces to avoid injury. For
safety, wear a pair of work gloves when assembling or
performing any maintenance on lockers.
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment,
hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification
or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced,
modified or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER'S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers
place of business or require Buyer to return the goods to Seller for inspection on Seller's premises. Transportation charges covering returned goods will
be borne by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1111202

UNASSEMBLED BOX LOCKERS

Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000

LIMITED WARRANTY

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
(615) 446-8000
or (866) 446-8686 (toll free)
Website: www.tennsco.com
THREE WIDE UNIT
E-mail: Info@tennsco.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BK6-121512-3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tennsco BK6-121512-3

  • Page 1 LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
  • Page 2 ASSEMBLY OF BOX LOCKERS -- THREE WIDE UNIT Tools required: 11/32" nut driver (11/32" socket may be substituted). Estimated assembly time for two people is 30 min. All reference numbers refer to the illustrations in Figure 1, the door Top of detail, and the chart on the back cover.
  • Page 3 Bolt right side (Ref. No. 6) to the back If joining a 3-wide unit beside another unit, so that side flange fits around back, temporarily install a bolt and nut into the third and then attach side to top, bottom and sixth holes down from the top of the outer frame(s) shelves.
  • Page 4 We make every effort to ensure that all units ship complete and arrive undamaged. However, should your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html. TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:...

This manual is also suitable for:

Bk6-121812-3Bk6-121212-3Bk6-151812-3Bk6-151512-3

Table of Contents