Tennsco 1842 Assembly Instructions

Tennsco 1842 Assembly Instructions

Storage cabinet, 42" high

Advertisement

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
Congratulations on your purchase of a
Counter High Storage Cabinet from
Tennsco! Our cabinets provide abundant
storage space; the Model 1842 is 36"w x
18"d x 42" tall, while the Model 2442 is
36"w x 24"d x 42" tall. Our cabinets are
rigidly constructed to give you years of
dependable and efficient service. Nylon
lock-bar guides ensure smooth,quiet
operation. A locking handle with two keys
provides a three-point locking system for
added security. Sturdy adjustable shelves
provide exceptional strength — up to
150 lbs. per shelf (evenly distributed) on the
18" deep cabinet and up to 200 lbs. per
shelf (evenly distributed) on the 24" deep
cabinet. And our baked-on powder finish adds
even more durability.
GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various pieces
to avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your cabinet.
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment,
hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification
or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified
or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER'S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers
place of business or require Buyer to return the goods to Seller for inspection on Seller's premises. Transportation charges covering returned goods will
be borne by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
Mailing Address:
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2570110
STORAGE CABINET, 42" High
Models 1842 & 2442 Counter-Height
Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000

LIMITED WARRANTY

TENNSCO CORP.
P.O. Box 1888
Dickson, TN 37056-1888
(615) 446-8000 (800) 251-8184
Shipping Address:
TENNSCO CORP.
201 Tennsco Drive
Dickson, TN 37055
(615) 446-8000 (800) 251-8184
PK-2570110

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1842 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tennsco 1842

  • Page 1 LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
  • Page 2 INSTALLATION OF 42"H STORAGE CABINET Tools needed: An " nut driver (provided free with unit); a hammer; and a flathead screwdriver. Two people recommended for installation. Approximate assembly time: 15 to 25 minutes. The reference numbers used throughout this Place the shelf (Ref. No. 5) into the shelf adjusting sheet refer to the illustration on the back cover.
  • Page 3 Handle/Locking System Installation Instructions Set the unit upright and attach the top by inserting the weld-studs Place the locking handle (Ref. No. 8) on the into the holes right hand door and provided on fasten with two " the left and hex head bolts and right sides.
  • Page 4 *Included in Ref. No. 8, locking handle with keys and hardware (Part No. 043LH). **Available Locally Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

This manual is also suitable for:

2442

Table of Contents