Tennsco B-8400 Assembly Instructions

Tennsco B-8400 Assembly Instructions

Kd bookcase

Advertisement

Be Sure To Save This Instruction Sheet For Future Reference!
CONGRATULATIONS on your selection of a
TENNSCO B-8400 bookcase! Tennsco
bookcases combine the strength you need
with the versatility of easily adjustable
shelves. Features include seven heavy-duty
reinforced shelves to handle loads of up to
200 pounds per shelf, a raised base to keep
materials safe from mops and damaging
cleaners; double wall construction to keep
materials from slipping behind uprights; and
slotted shelves to allow for shelf dividers. Top
it off with our tough baked-on enamel finish,
and you have a shelving unit which will
remain attractive through years service.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects
in materials and workmanship for a period of one (1) year from the
date of shipment, hereunder. This warranty shall not apply in the
event goods are damaged as a result of misuse, abuse, neglect,
accident, improper application, modification or repair by persons not
authorized by Seller, where goods are damaged during shipment, or
where the date stamps on the goods have been defaced, modified or
removed. UNLESS CONSIDERED UNENFORCEABLE OR
UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY EXCLUDED.
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS
SHALL BE LIM IT ED TO A REFUND BY SELLER OR
REPLACEMENT OF THE GOODS AT SELLER'S OPTION, AND
SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND,
WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR
APPROVAL. Seller shall have the right to inspect any goods claimed
to be defective at Buyers place of business or require Buyer to return
the goods to Seller for inspection on Seller's premises. Transportation
charges covering returned goods will be borne by Seller only if such
goods are proven to be defective, are covered by this warranty and are
returned within the warranty period stated above.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1550499
KD BOOKCASE
Models B-8400
Tennsco Corp., Dickson, TN 37056-1888 * (615) 446-8000
Some parts may have sharp edges. CARE must be taken
when handling various pieces to avoid injury. For safety, wear
a pair of work gloves when assembling or performing any
maintenance on shelving unit. Shelving unit is designed to be
placed upright on a flat surface. Distribute the weight of items
stored on the shelves evenly across the shelves. Do not place
heavier items on the upper shelves. If the shelving unit is to
be located in an uneven manner or positioned on an unlevel
surface, the unit should be secured to a wall or floor with
appropriate fasteners. Do not use as a ladder!
Unit Dimensions: 38"w x 12"d x 84"h

GENERAL SAFETY INFORMATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-8400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tennsco B-8400

  • Page 1: Limited Warranty

    LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in the...
  • Page 2 Step By Step Installation Instructions Tools required: One phillips screwdriver and a 3/8" wrench or nutdriver. Unit should be assembled on any convenient, non-marring flat surface. 1. Remove all parts from carton and check against the parts list on back cover for any missing parts.
  • Page 3 10. Set unit upright and place the top shelf shown. (Ref. No. 5) into position. The edges of the shelf will fit on the outside of the two uprights and the back. The Tennsco logo should face the front of the bookcase. (Instructions continue on next page)
  • Page 4: Parts List

    Tool (Quantity: 1) (Part No. B-12) (Part No. B-1) (Available Locally) (Available Locally) ORDER REPLACEMENT PARTS DIRECT FROM TENNSCO Please provide the following information: Contact: Tennsco Corp., P.O. Box 1888 • Model number Dickson, TN 37056-1888 • Part description and number as shown above...

Table of Contents