Chapter 3 Using The Subsystem; Inserting A Disk Cartridge - Sony SMO-S551 User Manual

Chapter 3 Using the Subsystem

Inserting a Disk Cartridge

1
Press the POWER switch located on the left
side of the front panel.
This turns on the subsystem and causes the
POWER indicator to light up.
Press th POWER
switch
2
Start up the host computer. Refer to the
manual supplied with the host computer for
the start up procedure.
3
Insert a disk cartridge with the side you want
to use facing upwards.
To use Side A, insert the
disk with "A" facing
upward.
4
Access or write data on the disk using
software commands on the host computer.
The BUSY indicator lights up while the unit
is accessing the disk.
■ What to do if the subsystem stops
operating
When the temperature in the subsystem exceeds
the preset level, the BUSY indicator starts
flashing on and off at about 2-second intervals,
regardless of whether or not a disk is being
accessed, and the subsystem stops operating.
If this happens, you should improve the
ventilation of a setting area.
If the subsystem still refuses to operate, unplug
the unit and contact your dealer.
Chapter 3 Using the Subsystem
25