Installation - Husky H4410 Use And Care Manual

Installation

1
Cleaning the air hose
□ A 3/8 in . air hose is required, with a maximum length of 25
ft .
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply .
NOTE: If a longer air hose is required, connect a 1/2 in .
air hose to the 3/8 in . air hose to ensure the ratchet wrench
has the necessary air supply .
2
Connecting to the air supply
□ Always use clean dry air . Excessive moisture and dirt will
greatly reduce the life of any air motor . We recommend the
installation of an in-line filter-regulator-lubricator as close
to the tool as possible .
□ Ensure all hoses and fittings are the correct size and
secured tightly .
Recommended Air Line Set-Up
Part Description
A 3/8 in . Butterfly Impact Wrench
B Quick Plug
C Quick Coupler
D Air Hose
E In-line Regulator
F In-line Lubricator
G In-line Filter
H Air Compressor
5
Please contact 1-888-43-HUSKY for further assistance .
HUSKYTOOLS .COM