How To Replace The Lithium Battery - Panasonic NV-MD9000EN Service Manual

6. HOW TO REPLACE THE LITHIUM BATTERY

(PROCEDURE)
1. Remove the Mother C.B.A.. (Refer to Disassembly Procedures.)
2. Unsolder the Lithium Battery "ML920S" and then replace the new
one. (See Fig. B1 .)
Fig. B1
Note:
The lithium battery is a critical component. (Type No.: ML920S Manufactured by Panasonic.)
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct
polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
9