Caution For Ac Cord (Vja0940 Type); Information For Your Safety - Panasonic NV-MD9000EN Service Manual

2. Drive Circuit
3. Video 1 Circuit
4. Video 2 Circuit
5. Control Circuit
6. LCD Circuit
7. Head/ Rec Amp Circuit
8. Power Circuit
9. Camera Circuit
10. Lens Drive Circuit
The following circuits are contained in Mother C.B.A.
1. Mother Connection Circuit
2. Ex Input Circuit
3. HP Amp Circuit
4. MF Ring Circuit
About lead free solder (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution:
- Pb free solder has a higher melting point than standard solder;
Typically the melting point is 50-70°F (30-40°C) higher. Please use
a high temperature soldering iron. In case of the soldering iron
with temperature control,please set it to 700±20°F (370±10°C).
- Pb free solder will tend to splash when heated too high (about
1100°F/ 600°C).
When soldering or unsoldering, please completely remove all of the solder on the pins or solder
area, and be sure to heat the soldering points with the Pb free solder until it melts enough.

2. CAUTION FOR AC CORD (VJA0940 TYPE)

2.1. INFORMATION FOR YOUR SAFETY

IMPORTANT
Your attention is drawn to the fact that recording of pre-recorded tapes or discs or other
3