Advertisement
Assembly Instructions
Fix one end of all 12pcs wooden poles to one panel, tighten half firstly, then fix
another end of poles to other panel.
Make sure each wooden pole is put correctly into the hole on panel and then tighten
all wooden poles firmly.
LOCKING HOLE
After assembling all wooden poles, use the bolt through the different locking hole on
top of panel to fix the climbing frame.
ANTI SLIP
In order to ensure the climbing frame is stable
and non-slip, please stick the rubber stickers
to the bottom of the panels.
Storage & Care Instructions
- Check and tighten all parts regularly.
- Keep away from water and direct sunlight.
- For indoor and domestic use.
MADE IN CHINA
FOR AU / NZ: IMPORTED FOR KMART
STORES IN AUSTRALIA AND NEW ZEALAND.
Put one end of the wooden pole to the hole
on panel then take the screws and pass them
through the hole, using the tool (screwdriver
or cordless drill) to tighten.
Note: Please do not tighten firmly before
all wooden poles are assembled.
Open
2
Folded
Advertisement
