Bryant gas furnaces User's Information Manual page 12

Programming
The copy command becomes available after
programming the entire previous day.
Yes
Select Yes or No to copy
the previous day's
program to this day.
No
If Yes is selected:
Selecting Yes, then pressing mode will copy the
previous day's program and then will ask the
Press
same copy question again. If yes is selected
each time, this routine will repeat.
MODE
If No is selected, as in previous steps, flashing prompts for input will appear for
the 4 time periods for the next day.
4 Time Periods
No
Co
Tu
Py
Page 11
If No is selected:
Press
MODE