Page 2
VTM-91-772/C RECORD OF CHANGES CHANGE DATE TITLE OF BRIEF ENTERED NUMBER DESCRIPTION Mar 2004 General Formatting Edits Jason Soper Aug 2007 Added Maintenance Section Jason Soper Nov 2013 Various minor improvements Jason Soper...
VTM-91-772/C SECTION 1 GENERAL INFORMATION AND SAFETY PRECAUTIONS 1-1. GENERAL SAFETY PRECAUTIONS The following general safety precautions are not related to any specific procedures and therefore do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply during many phases of operation and maintenance.
VTM-91-772/C 1-3. INTRODUCTION 1-3.1 Purpose. This manual provides general information on the AS-3772B/U, as well as an operational and functional description of the antenna and installation data. Information in this manual will assist in installing and operating the antenna. 1-3.2 Scope. This technical manual is provided to aid in the operation and installation of the antenna.
Page 7
VTM-91-772/C Table 1-1. Reference Data PARAMETER SPECIFICATION NOMENCLATURE ANTENNA AS-3772B/U MANUFACTURER VALCOM MANUFACTURING GROUP, INC. 35736 FREQUENCY RANGE TRANSMITTING: 2 TO 30 MHZ IMPEDANCE VARIES POLARIZATION VERTICAL POWER CAPABILITY 5 KW SINGLE ANTENNA RADIATION PATTERN OMNIDIRECTIONAL TEMPERATURE OPERATING: -54°C TO +65°C NON OPERATING: -62°C TO +71°C...
Page 8
Table 1-2. Equipment, Accessories and Documents Supplied OVERALL DIMENSIONS (INCHES) WEIGHT NOMENCLATURE CRATED UNCRATED (POUNDS) UNCRATED HEIGHT HEIGHT ANTENNA 13.00 AS-3772B/U (BASE) TECHNICAL MANUAL FOR AS-3772B/U ANTENNA VTM-91-770 SILCONE SEALANT MS24693-C140 3/8-16 x 0.75 L FLAT HD SCREW MIL-A-907E ANTI-...
VTM-91-772/C SECTION 2 OPERATION 2-1. INTRODUCTION This chapter provides operating instructions for the antenna. 2-2. CONTROLS AND INDICATORS The antenna contains no controls or indicators. 2-3. OPERATING PROCEDURES 2-3.1 Operator Turn-On. No operator turn-on procedures apply since no power is required to operate the antenna.
VTM-91-772/C SECTION 3 FUNCTIONAL DESCRIPTION 3-1. INTRODUCTION This chapter provides the functional description of the antenna. 3-2. OVERALL LEVEL The antenna is a base mounted, high-power antenna which provides omnidirectional coverage for general purpose communications reception and transmission from 2 to 30 MHz when used in either a twin whip and tuner configuration or single whip and tuner configuration.
4-1. SITE INFORMATION Valcom's AS-3772B/U HF Antenna is designed primarily for shipboard installation. The antenna can also be used at shore installations. The antenna should be installed in a non-obstructed environment, clear from any contiguous structures, such as masts, bulkheads, or other metal objects.
VTM-91-772/C b. Before assembling the two sections together, the sleeve at top of the bottom section must be coated with a thin layer of electrically conducting nickel-based anti-seize compound MIL-A- 907E (supplied). A small dab of anti-seize in each of the eight threaded holes will assist with installing the screws later.
Page 13
VTM-91-772/C 2.0 IN (5.1 CM) 3/8-16 UNC x " LONG SST CSK SCREW 4 PLACES AROUND CIRCUMFERENCE COVER WITH RTV AFTER INSTALLING 3/8-16 UNC x " LONG SST CSK SCREW 4 PLACES AROUND CIRCUMFERENCE VIEW A COVER WITH RTV AFTER INSTALLING - VIEW A - 3X 1/4-20 UNC-2A SST BOLT FEEDPOINT(S)
VTM-91-772/C SECTION 5 MAINTENANCE 5-1. SCHEDULED MAINTENANCE The antenna is virtually maintenance free. The external finish is a silicone alkyd paint. The minimum finish life before showing signs of deterioration should be at least six years under normal climate conditions. When used in salt-water environments, it is recommended to wash the antenna base with fresh water to remove any build-up of dried salt residue.
Page 15
VTM-91-772/C 5-2.2 Cosmetic Repairs The antenna has been designed to meet and tested to pass Naval Shock and Vibration requirements (MIL-S-901 and MIL-STD-167 respectively). Under and beyond normal expected environmental stresses onboard ships, this antenna will not suffer mechanical or electrical failure.
SECTION 6 QUICK REFERENCE DATA GENERAL Manufacturer’s contact information can be found in Section 6-2. MANUFACTURER'S ADDRESS Postal address: Shipping address: Valcom Manufacturing Group, Inc Valcom Manufacturing Group, Inc P.O. Box 603 175 Southgate Drive Guelph, Ontario Guelph, Ontario Canada...