Download Print this page

OEM CYCLONE Operation And Maintenance Manual page 13

Advertisement

discharge 1 to 3% per month and you do not want to store batteries for an extended
period of time without them being fully charged. The higher the temperature, the
faster the battery will self-discharge.
The Summit on-board charger in your machine has been programmed to charge the
Lifeline® AGM sealed batteries that were installed originally from the factory. If
any other type of battery is installed on the CYCLONE, your charger profile may
need to be changed.
Quick Charge Stand Alone Charger
or if wires are cut or have damaged insulation. Using this charger with any of
these symptoms could result in a fire, property damage, or personal injury. Have a
qualified service person make the necessary repairs. See the Quick Charge
Corporation Operating Instructions for additional information and FAQs.
Please see additional information in charger manuals!
This model has a changeover tap to
accommodate 208 or 230/240 volt input.
You must check that your incoming power
to the charger matches where the
changeover tap is placed for the charger to
work correctly. Always use a qualified
electrician to install correct AC
connections.
Do not disconnect the plug from the
Cyclone when the stand-alone charger is
on. The resulting arcing could cause the
batteries to explode. Do not expose this
charger to rain if possible.
Make sure the AC cord, DC output leads,
terminals, and connectors are all in good
working condition. Do not use the charger
if there are any signs of stress or damage,
13

Advertisement

loading

This manual is also suitable for:

Cyclone ss