1
1. Water detection switch coupler
(5) Unscrew the filter cup from the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01961]
1
2
1. Filter cup
2. Water detection switch lead
(6) Drain the water in the filter cup by soak-
ing it up with a rag.
(7) Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
(8) Connect the water detection switch cou-
pler securely until a click is heard.
ZMU07930
ZMU07931
[ECM01971]
Trouble Recovery
1
1. Water detection switch coupler
(9) Fasten the water detection switch lead
with the plastic tie.
1
1. Plastic tie
(10) Install the top cowling.
(11) Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
F40G, F70A
(1) Stop the engine.
(2) Remove the top cowling.
(3) Remove the cover.
ZMU07932
ZMU07933
94