Overview Of The Dr-44Wl Quick Menu - Tascam DR-22WL Manual

Playback speed setting status
7
This shows the playback speed status of the unit.
Icon Playback speed
No indicator Playback speed not changed
×1.1 – ×2.0
×0.5 – ×0.9
When playback speed not controllable
Power supply status
8
This shows the power supply status of the DR unit.
When a battery is being used, a battery icon shows the
amount of power remaining in bars (
The battery is almost dead and the power will soon turn off
(standby) if the icon has no bars
When using the included GPE053B AC adapter or USB bus
power, appears.
Recorder operation status
9
This icon shows the DR unit's operation status.
Indicator Meaning
Stopped
8
Paused
9
Playing back
7
Searching forward
,
Searching backward
m
Skipping to the beginning of the next file
/
Skipping to the beginning of the previous file
.
Elapsed time
0
This shows the elapsed time in hours: minutes: seconds.
Remaining time
q
This shows the remaining time in hours: minutes: seconds.
File name
w
This shows the name of the file being played or recorded.
Peak value in decibels (dB)
e
This shows the peak value in decibels (dB) of the DR unit.
Playback position/slide bar
r
The unit's playback position is shown by a bar. You can drag
the slide bar to change the playback position.
Level meters
t
These show the unit's level meters.
TRACK/INPUT buttons
y
Press these buttons during recording (4CH mode) or
recording standby (MTR mode) to select recording channels
on the DR-44WL.
Selected buttons blink.
When the "INPUT SETTING" screen is open, press one of
these buttons to show the track to set.
PLAY/PAUSE/STOP button
u
Use this button to start and stop playback of the DR unit.
When playback is stopped, press this button to start
playback.
Press this button during playback to pause playback at the
current position.
Press when recording to stop recording.
REC/REC PAUSE button
i
Press this button to stop recording by the unit.
When stopped, press this button to put the unit into
recording standby. The button will start to blink.
8
TASCAM DR CONTROL
, , ).
.
DR CONTROL
When in recording standby, press this button to start
recording.
Press when recording to pause recording. The button will
start to blink.
. button
o
Press to return to the beginning of a file that is playing or
stopped in the middle.
Press and hold this button to search backwards.
/ button
p
Press this button during playback or when playback is
stopped to skip to the next track.
When an IN/OUT point is set between the current position
and the beginning of the playback file, pressing this button
skips to that point.
Press and hold this button to search forward.
QUICK button
a
Press to open the "QUICK" menu.
INPUT button
j
Press to open the "INPUT" menu.
MARK button
d
Press during recording to add a mark manually.
MENU button
f
Press to open the "MENU" screen.
BROWSE button
g
Press to open the "BROWSE" menu.
Overview of the DR-44WL QUICK
menu
Use the "QUICK" menu to check information about the DR unit.