Fuses Replacement - Alfa Romeo Giulia Owner's Handbook Manual

171
pull out the bulb-bulb holder assembly
from the headlight body by turning it
anticlockwise fig. 172;
172
remove the bulb by sliding it off the
bulb holder
install the new bulb, making sure it is
correctly inserted in the bulb holder;
then insert the bulb, bulb holder and
connector assembly in the housing on
the headlight body and turn it clockwise,
making sure that it is locked correctly;
refit the cover by tightening the two
fixing screws.
Front light cluster with main
beam/dipped beam Xenon gas
discharge headlights
To replace the bulbs of the main beam
headlights/dipped headlights contact an
Alfa Romeo Dealership.

FUSES REPLACEMENT

08026S0021EM
GENERAL INFORMATION
168) 169) 170) 171) 172)
71)
Fuses protect the electrical system: they
intervene (blow) in the event of a failure
or improper action on the system.
Fuse extracting pliers
To replace a fuse, use the tongs housed
in the luggage compartment fusebox
cover fig. 173.
08026S0022EM
Grab the pliers from the upper tabs,
press them and extract the pliers pulling
upwards.
173
The pliers fig. 174 have two different
ends, specifically designed to remove the
different types of fuse present in the car:
1: MINI fuse;
2: J-CASE fuse.
174
After use, refit the pliers in position,
proceeding as follows:
grasp the pliers from the upper tabs;
press the tongs in their housing,
pushing downwards, until they click into
place.
08036S0053EM
08036S0005EM
169