NuAire AM Installation Manual

NuAire AM Installation Manual

Airmover supply & extract fan

Advertisement

Quick Links

1.0 SAFETY INFORMATION
The provision of the electrical supply and the connection of the unit to the mains must be
carried out by a qualified electrician.
Isolate from power supply before removing any covers. During installation / maintenance ensure
all covers are fitted before switching on the mains supply.
All-pole disconnection from the mains as shown in the wiring diagram must be incorporated
within the fixed wiring and shall have a minimum contact separation of 3mm in accordance with
latest edition of the wiring regulations.
This unit must be earthed.
Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Duct
runs terminating close to the fan must be adequately protected by suitable guards.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Precautions must be taken to avoid the back-flow of gases into the room from the open flue of
gas or other fuel-burning appliances.
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the safe use of the appliance by a person responsible for their safety.
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried
out by children.
1.1 Symbols
GENERAL WARNING
Signifies a general warning regarding hazard specified by supplementary information.
ELECTRIC SHOCK
This unit must be completely electrically isolated before any panels are removed. Check
mains supply and control connections.
ROTATING PARTS
This unit contains fast moving rotational parts which may start automatically. It is the
sole responsibility of the installer to adequately guard these components.
REFER TO INSTRUCTION MANUAL
Read and understand the installation and maintenance manual before installing,
operating or maintaining this product.
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
AM
Airmover Supply & Extract Fans
Installation Manual
06. 09. 21. Document Number 671174
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AM and is the answer not in the manual?

Questions and answers

Summary of Contents for NuAire AM

  • Page 1 REFER TO INSTRUCTION MANUAL Read and understand the installation and maintenance manual before installing, operating or maintaining this product. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 2: Personal Protective Equipment

    1, 2, 3, 4, 5 or 6 (4 Pole Units) 1 or 2 (6 Pole Units) Underframe supplied 4. Controls: ES = Ecosmart Controls by others. No Suffix = No Controls Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 3: Electrical Installation

    5.2.1 Enabling Devices ES-PIR: Passive Infra-Red (PIR) Sensor ES-TC: 7 Day Timeclock 5.2.2 Sensors ES-TEMP: Temperature Sensors ES-CO2: CO2 Sensor ES-RH: Humidity Sensor Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 4 30m. Screening must be Main Supply 400V 3ph 50Hz earthed at both ends. To Fan Glands supplied. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 5: Maximum Number Of Devices

    Fault Connections - No Fault = Contacts are closed Fault - Contacts are opened Heat Demand - Contacts closed when heating is selected. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 6: Maintenance

    •Check operation of damper actuators and linkages and adjust as to unit, the fan will run at minimum speed until the switch live signal necessary. activates it to boost. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 06. 09. 21. Document Number 671174...
  • Page 7: Warranty

    Please call After Sales Support for further information on items not listed above. Ensure that Nuaire product is made safe from any electrical / water / refrigerant supplies before dismantling commences. This work should only be undertaken by a qualified person in accordance with local authority regulations and guidelines, taking into account all site based risks.
  • Page 8 The equipment referred to in this Declaration of Incorporation is supplied by live are not prevented by the equipment panels or by fixed installation detail Nuaire to be assembled into a ventilation system which may or may not include (eg ducting), then guarding to the appropriate standard must be fitted.

Table of Contents