IQBoard IQTouchOverlay DVT Installation Manual

IQBoard IQTouchOverlay DVT Installation Manual

Advertisement

Quick Links

IQTouchOverlay
DVT
Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IQTouchOverlay DVT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IQBoard IQTouchOverlay DVT

  • Page 1 IQTouchOverlay Installation Guide...
  • Page 2  Keep the whiteboard surface and reflective strips clean to ensure smooth writing.  Keep the DVT touch frames installed horizontally Chapter2 Accessory List Name Quantity Remarks IQTouchOverlay DVT(frame*4+cameras*4/2) Standard Accessory 8m USB Cable Standard Accessory Certification Standard Accessory M4*10 Self-tapping Screws...
  • Page 3 Pic of 2-pt DVT touch frame for reference as below: Fixed Plate Fixed three holes on each side of the short frame at the back. Pic of 10-pt DVT touch frame for reference as below: Fixed Plate Fixed three holes on each side of the short frame at the back.
  • Page 4 Chapter3 Installation Instruction Please follow steps below one by one to ensure the assemble in a right way. 3.1 How to assemble the four DVT touch frames as one Step1: Insert angle iron into overlays and fix them with screws. Note: ...
  • Page 5 3.2 How to assemble the DVT touch frame with the whiteboard Method1: When the size of the whiteboard is larger than that of DVT touch frame, plz screw the brackets both on the frame and whiteboard, as shown in the pic below. Ensure the distance between fixed brackets is the same as well. Method2: When the size of the whiteboard is the same as that of the DVT touch frame, plz screw two brackets at two sides and fix the frame with whiteboard tight.
  • Page 6 3.3 Paste the hotkeys Soft Hotkeys should be pasted on the margin area of whiteboard as shown below. Chapter4 Solutions The overlay DVT touch frame could combine with whiteboard, wall, ferrous metal surface and push-pull blackboard. 4.1 Combine with Whiteboard...
  • Page 7 4.2 Combine with Wall (Requirements of specified wall: Surface roughness ≤2mm.) 4.3 Combine with Push-pull Blackboard Notes: The installation instruction could also be applied to the overlay which is magnetically mounted.
  • Page 8 [Kd046EN]-SKDDVT20170919...

Table of Contents