Advertisement
Quick Gateway Configuration
Warning:
Do not press the
Reset
button is in a small circular hole on the rear panel. If you want to restore the default
settings, insert a thin wire (such as a paper clip) into the hole, press gently for 1 second, and
then release the button. The system reboots and returns to the factory defaults.
Logging in to your gateway
To change the settings on your gateway, you must log in to the gateway's interface. Make
sure that you have completed the steps in
1. Open your internet browser application and type 192.168.1.1 into the address line.
The login dialog appears.
2. Enter the default username and password: admin/admin, and click OK. The Device
Info summary page appears.
Reset
button unless you want to clear the current settings. The
"Installation"
before you begin.
Advertisement
