Advertisement
Installation
Connect one end of the supplied DSL cable to the port labeled DSL on the gateway
and connect the other end t the DSL wall jack installed by your provider.
For all other devices, connect an Ethernet cable from that device to any of the LAN
ports on the gateway.
Plug the power cord into the wall outlet and into the power jack on the back of the
gateway. For additional protection, connect the power cord to a surge protector.
Turn on the unit by pressing the power button on the gateway.
Your gateway is now automatically being set up to connect to the Internet. This
process may take a few minutes to complete before you can begin using your Inter-
net applications (browser, email, etc.). If you are unable to connect to the Inter-
net, verify that all cable connections are in place and that the router's power is
turned on.
Advertisement
