Advertisement
Ready To Go
SimpleSpec 200.97-Divide
Installation
Required Tools
Drill
1
Drill Pilot Holes (�24)
a
base Plate templates (3-15-2160) and a Corner template and will be provided. The templates have hole locations for
drilling. Spacers (3-15-2347) will also be provided, unique to this configuration.
ILTUO Installation
Template - Template Spacer
b
Following the Installation Template, drill pilot holes. use
appropriate pilot hole diameter and depth for the type of
substrate you are fastening to.
*3form stocks the drill bits required for the concrete
and wood pilot holes. If you wish to purchase a drill bit,
please contact your 3form sales representative.
Drill Bits
Hammer Drill
3-15-2347
For more information, please visit 3-form.com/Elements or call 800.726.0126
FEbruary 2021 | MaN-rTG-200-97 | rEV 001 © 2021 3form, Inc. all rights reserved.
tm
Rubber Mallet
ILTUO Installation
Template - Base Plate
3-15-2160
ILTUO Installation
Template - Corner
3-15-2340
Substrate
Ø
Concrete
8mm
Wood
3/16"
Installation Manual
Saw
Drill Bit
Depth
3-15-2350
min 4.3"
3-15-2335
min 3.5"
Anchors
3-15-2309
3-15-2310
6
Advertisement
