Related Manuals for 3form Divy SimpleSpec 200.51
Summary of Contents for 3form Divy SimpleSpec 200.51
- Page 1 Ready To Go SimpleSpec 200.51-Divy Installation Manual For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
-
Page 2: Contents Overview
1" Shelf Holder KIT SS: 3-15-754 Set Screw Stainless Steel: 3-15-754-K BO: 3-15-2018 3-15-776 Black Oxide: 3-15-2018 For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved. - Page 3 Black Oxide: 3-15-2015-K Required Tools Concrete or Metric Allen Drill Cable Cutters Super Glue Plumb-bob Wood Bit Wrenches For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 4 Ready To Go SimpleSpec 200.51-Divy Installation Manual Overview SimpleSpec 200.51 provides a robust partition with the added quality of acoustical absorption. The 3form Sola Patterned Felt is complimented by a beautiful Birch Plywood Edge. / " Hardware Outside " Cable Centerline 1"...
- Page 5 Place a washer under the screw head. Torque the screw to 15 Nm. Remove screw. For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 6 5 ft-lb. surface. For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 7 Attach the Cable Tensioner (SS: 3-15-1636; BO: 3-15-2005) to the floor anchor with the included M8 Threaded Rod (3-15-1754). For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 8 Maximum Tension = 400 lbs exit on the tensioner. Hollow Substrate: Max Tension + Weight < 70lbs For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 9 Installation Manual Installation Dry-Fit Panel and Measure Do not tighten set screw! Do not tighten set screws! For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 10 Ready To Go SimpleSpec 200.51-Divy Installation Manual Installation Dry-Fit Panel and Measure cont... Do not tighten set screws! For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 11 Ready To Go SimpleSpec 200.51-Divy Installation Manual Installation Dry-Fit Panel and Measure cont... Remove Panel For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 12 Tighten set screws to the cable (top side brackets only). 1" (25mm) ⅜" For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 13 Allen wrench through tensioner as shown in 6c. 1" (25mm) For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
- Page 14 Cut cable and put a drop of super glue at end of cut cable to keep from fraying. For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.
-
Page 15: Spec Sheet
• Use strong solvents, highly alkaline or abrasive cleaning agents. • Do not completely saturate module with cleaning solution or water. For more information, please visit 3-form.com or call 800.726.0126 OCTOBER 2019 | MAN-RTG-200-51 | REV 005 © 2019 3form, Inc. All rights reserved.