Pyle PPHP42B User Manual page 2

WARNING
1. DO NOT place objects on top of the device, as objects may
scratch the device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT insert any foreign objects into the device.
4. DO NOT expose the device to strong magnetic or electrical eld.
5. DO NOT use the device in the rain
6. Please check with your Local Authority or retailer for proper
disposaI of electronic products.
7. DO NOT disassemble the device. Only a certi ed service
technician should perform repair.
8. The device has apertures to disperse heat. DO NOT block the
device ventilation, the device may become hot and malfunction
as a result.
Illegal operation may cause personal injury, which could be fatal and may cause
damage to property. For safety, we do not suggest to charge unit and use micro-
phone together.
2
www.PyleUSA.com
CONTROL BOARD FUNCTIONS
1. Short press to choose input signal, press and hold to turn o front light
2. Short press to choose next channel, press and hold to increase sound volume
3. Short press to Play/stop on USB/Micro SD mode, press and hold to start TWS function.
4. Short press to choose last channel, press and hold to decrease song volume
5. Turn ON/OFF unit
6. 6.5MM microphone input jack
7. 3.5MM AUX input jack
8. Charge LED indicator
9. USB/Micro SD slot
10. DC 5V input
TWS - True Wireless Setup
1. Turn on two same PA speakers that you're attempting to pair together and switch
both units to Wireless BT mode.
2. Choose one of the unit to begin pairing process.
3. Press down on the PLAY button for 3 seconds until you hear a chiming sound;
This means the unit is already paired with another unit.
4. Now begin playing your music through Wireless BT enabled mobile device.
The speakers will begin to play your music simultaneously.
NOTE:
TWS function is for two speakers at a time only. It can not support more than two
speakers at the same time.
3
www.PyleUSA.com