Beko HNU51311SH User Manual page 12

4 Cleaning and maintenance
• This appliance complies with the Regulation for
Supervision of the Waste Electric and Electronic
Equipment.
• This hood is designed to be used over the hob.
Make sure that the wall can bear the weight of
the hood. Cost of crushing, cutting and similar
procedures to be carried out on the wall or cab-
inet during installation should be covered by the
consumer. The hood may be used with a flue
system that discharges the air, or without a flue
(by attaching the carbon filter). Pay attention to
the matters that may be encountered before or
during the installation. Installation should be
performed by the authorised service agent. In-
stallation should be carried out by an authorised
specialist who has knowledge of ventilation. Ser-
vice life of the appliance identified by the Minis-
try of Industry (period of availability for the spare
parts required for the performance of functions
of the appliance) is 10 (ten) years.
• Your appliance must be kept in its original pack-
aging to avoid damage to its components during
handling and transportation.
• Keep the appliance in its normal position during
handling.
• Do not drop the appliance and protect it against
damage during transportation. Warranty does
not cover the faults and damages occurred dur-
ing transportation after delivery of the appliance
to the customer.
12 / EN Cooker Hood / User Manual