Sealey SCFS04 Instructions

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: Please ReaD tHese INstRUCtIoNs CaRefUlly. Note tHe safe oPeRatIoNal ReQUIReMeNts, WaRNINGs aND
CaUtIoNs. Use tHIs PRoDUCt CoRReCtly aND WItH CaRe foR tHe PURPose foR WHICH It Is INteNDeD. faIlURe to Do so May
CaUse DaMaGe aND/oR PeRsoNal INJURy, aND WIll INValIDate tHe WaRRaNty. Please KeeP INstRUCtIoNs foR fUtURe
RefeReNCe.
1. safety
WaRNING! This safe is heavy (33.5kg) and care should be exercised in transit and handling to ensure that no one is injured.

Do Not drill holes in the casing for fixing purposes, this could undermine fire resistance. this is a free standing safe.

Do Not install in areas where damp and condensation may be present, underground or cellars for example.

WaRNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INtRoDUCtIoN
Heavy-duty *ABS shell with four bolt door locking mechanism. Dual wall filled with **cellular concrete for fire resistance and thermal
insulation. Electronic panel with LCD screen, accepts thousands of 6 digit codes. •Also supplied with two emergency override keys. Offers
up to one hour fire resistance with UL approval.
• Keep the cabinet key and any record of the code separate from the cabinet and unidentified.
* ABS Flame Retardant with UL 94 VO High Classification for strength and impact resistance.
** Cellular concrete is a non-flammable solid building material which belongs to building material category A1, offering a shield against heat in
the event of a fire.
3. sPeCIfICatIoNs
Model No:
External Size (W x D x H)
Internal Size (W x D x H)
4. INstallatIoN
4.1
Consideration should be given to the placing of the safe to ensure that it is placed in a discreet location and will not be easily found by
intruders.
Lever handle
fig.3
© Jack Sealey Ltd 2013
INSTRUCTIONS FOR:
eleCtRoNIC fIRe PRoof safe
450 X 380 X 305mm
MODEL No: sCfs04
SCFSO4
450 x 380 x 305mm
340 x 245 x 190mm
fig.2
fig.1
Keyhole plug
To open
Separate battery
module jack plug
socket beneath
Original Language Version
Wall/Door Thickness
Weight
Battery compartment
depress tab and lift
off cover.
LCD display
Yellow * button Green # button
55/82mm
33.5kg
Red button
Coding buttons
SCFS04 ISSUE - 2 (I) - 20/08/13