Bluetooth; Phone) - Chevrolet CORVETTE Owner's Manual

158 Infotainment System
Audio System
When using the Bluetooth mobile device
system, sound comes through the vehicle's
front audio system speakers and overrides
the audio system. The volume level while on
a mobile device call can be adjusted by
pressing the steering wheel controls or the
volume control on the centre console. The
adjusted volume level remains in memory
for later calls.
Bluetooth (Pairing and Using a

Phone)

Pairing
A Bluetooth-enabled mobile device must be
paired to the Bluetooth system and then
connected to the vehicle before it can be
used. See the mobile device manufacturer's
user guide for Bluetooth functions before
pairing the device.
Pairing Information
If no mobile device has been connected,
the Phone main page on the infotainment
display will show the Connect Phone
option. Touch this option to connect.
Another way to connect is to touch the
Phones tab at the top right of the display
and then touch Add Phone.
A Bluetooth smartphone with music
capability can be paired to the vehicle as
a smartphone and a music player at the
same time.
Up to 10 devices can be paired to the
Bluetooth system.
The pairing process is disabled when the
vehicle is moving.
Pairing only needs to be completed once,
unless the pairing information on the
mobile phone changes or the mobile
phone is deleted from the system.
If multiple paired mobile phones are
within range of the system, the system
connects to the paired mobile phone that
is set to First to Connect. If there is no
mobile phone set to First to Connect, it
will link to the mobile phone which was
used last. To link to a different paired
mobile phone, see Linking to a Different
Phone later in this section.
Near Field Communication (NFC)
If equipped, Near Field Communication (NFC)
allows compatible smartphones to be paired
with the infotainment system. To begin the
pairing process:
1. Refer to the smartphone's user manual
to verify whether is NFC compatible.
2. Unlock the smartphone.
3. Enable NFC on the smartphone if it is
disabled. The NFC icon should be in the
status bar of the smartphone.
4. Hold the smartphone 2.54 cm (1 in) or
less from the NFC sensor located above
the infotainment screen. See Instrument
Panel Overview 0 3.
5. Once pairing begins, a pop-up message
with a six-digit code will appear on the
smartphone and the infotainment
display.
6. Select Yes on the smartphone to confirm
the pairing process. A chime will sound
when pairing begins.
Multiple smartphones can be paired using
this technology.
Functionality varies by model and region.
Full functionality requires compatible
Bluetooth and smartphone, as well as USB
connectivity for some devices.
Pairing a Phone
1. Make sure Bluetooth has been enabled
on the mobile phone before the pairing
process is started.