Chevrolet CORVETTE Owner's Manual page 149

148 Infotainment System
Destination Entry command is, Navigate to
Place of Interest Hotels. If these
commands don't work, try saying, Navigate
to Place of Interest or Navigate to
Address and the system will do the rest.
Voice recognition can be used when the
ignition is on or when Retained Accessory
Power (RAP) is active. See Retained
Accessory Power (RAP) 0 198.
Using Voice Recognition
Voice recognition becomes available once
the system has been initialised. This begins
when the ignition is turned on. Initialisation
may take a few moments.
g
1. Press on the steering wheel controls
to activate voice recognition, or touch
on the infotainment display.
2. The audio system mutes and the system
plays a prompt.
3. Clearly speak one of the commands
described in this section.
g
Press to interrupt any voice
recognition system prompt. For example,
if the prompt seems to be taking too
g
long to finish, press again.
There are two voice prompt modes
supported:
Long verbal prompts: The longer prompts
provide more information regarding the
supported actions.
Short prompts: The short prompts provide
simple instructions about what can be
stated.
If a command is not spoken, the voice
recognition system says a help prompt.
Prompts and Screen Displays
While a voice recognition session is active,
there will be corresponding options
displayed. Manual interaction in the voice
recognition session is permitted. Interaction
during a voice session may be completed
g
entirely using voice commands, or some
selections may expedite a session. If a
selection is made using a manual control,
the dialogue will progress in the same way
as if the selection was made through a voice
command. Once the system is able to
complete the task, or the session is
terminated, the voice recognition dialogue
stops.
An example of this type of manual
intervention is touching on an entry of a
displayed number list instead of speaking
the number associated with the entry
desired.
Cancelling Voice Recognition
Touch the voice icon. Touching this icon
will terminate a voice recognition session
that was initiated by touching the icon on
the infotainment display.
Touch or say Cancel or Exit to
terminate the voice recognition session
and show the display from which voice
recognition was initiated.
i
Press or on the steering wheel
controls to terminate the voice session
and show the display from which voice
recognition was initiated.
Helpful Hints for Speaking Commands
Voice recognition can understand commands
that are either naturally stated in sentence
form, or direct commands that state the
application and the task.
Most languages do not support natural
language commands in sentence form. For
those languages, use direct commands like
the examples shown on the display.