abc beauty in the air BA1801 Instructions For Use Manual page 6

For additional protection, the installa-
tion of a residual current device (RCD)
having a rated residual operating cur-
rent not exceeding 30mA is advisable in
the electric circuit supplying the bath-
room. Ask your installer for advice.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
GENERAL DESCRIPTION
1. Power cord
2. Operation LED
3. On/off button
4. Clamp lever
5. Stand
6. Hair clamp
7. Curling Iron (diameter 16mm)
8. Cool tip
BEFORE USING THE DEVICE
- remove all packaging.
- Clean the device using a slightly damp soft cloth. Dry the device.
- fully uncoil the power cord.
OPERATION
1. Plug the appliance in.
2. Slide the ON/Off button to the ON (1) position. Once switched on, the
LED will indicate its status and the appliance will heat up to the target tem-
perature of 150°C.
3. Slide the ON/Off button to the Off (0) position to switch the appliance
off then unplug it.
4. Allow the appliance to cool down for 15 minutes before tidying it away.
MAINTENANCE AND CLEANING
1. Before cleaning, unplug and leave it to cool.
2. remove any product accumulation using a slightly damp cloth.
3. Dry the appliance after cleaning.
WARNING! To reduce the risk of electric shocks, do not immerse or expose
the appliance, the plug or the power cord to water or any other liquid.
This symbol, displayed on the product or its packaging, indicates that this
product complies with European directive 2012/19/EU and that it must not
be disposed of with household waste. It must be taken to an appropriate
collection point for the recycling of electrical and electronic equipment. By
making sure that this product is disposed of properly, you will help to pre-
vent any potentially-negative consequences for the environment and human
health. recycling materials helps to preserve natural resources.
6