3.1.4
Konfiguration 4
Untere und obere Anschlüsse überbrückt.
Ausführen aller im
q Abschnitt 3.1.3, Seite
Arbeitsschritte ohne Montage der Querbrücke:
Obere Anschlussschienen montieren
Untere Anschlussschienen einsetzen
Längsbrücken montieren
3.2
Zusammenbau
Montageplatte anbauen
1
1
Montageplatte (13) an vordere Gehäusehälfte (1.2) anlegen
2
Mit 2 Schrauben (37) und Spannscheiben (38) befestigen
10
8, beschriebenen
3.1.4
Configuration 4
The upper and lower connections are jumped.
Complete all of the steps described in
without mounting the transverse bridge:
Mounting the upper connecting bars
Inserting the lower connecting bars
Mounting the longitudinal bridges
3.2
Assembly
Attaching the mounting plate
2
1
Position the mounting plate (13) on the front half of the hou-
sing (1.2)
2
Fasten with 2 screws (37) and spring washers (38)
q section 3.1.3, page
8,
Gr. / Size
5
8 Nm