Black & Decker Price Pfister SAXTON RT6 Series Installation Manual page 4

10
10C
10B
10A
10D
10 HANDLE ATTACHMENT
Place Plastic Seal Rings (10A) against the bottom of Handle Hubs (10B). Connect
Handles (10C) onto Valves (10D).
11
11B
11 SECURING HANDLES
Be sure Valves and Levers are in the "OFF" position. Secure handles by holding the
Lever (11B) in place and tighten the Hubs (11A) by rotating them in a clockwise direction.
To remove handles, rotate Hubs (11A) in a counterclockwise direction.
10C
10B
10A
10D
11A
ENGLISH
12
12A
12B
12C
12A
12B
12 HOSE GUIDE INSTALLATION
Insert Guide Holder (12A), Hose Guide (12B) and Washer (12C) into Decorative Hose
(12D). Remove Clip (12E) and Plaster Guard (12F) from Spray Hose (12G).
From underneath deck, slide Washer (12H) and Locknut (12J) into Spray Hose (12G) as
shown. Apply PTFE plumber's tape to threaded end of Decorative Hose (12D) according
to manufacturer's instructions. Attach Spray Hose (12G) to Decorative Hose (12D).
Connect Guide Holder (12A) onto Hose Guide (12B). Insert Hose Guide (12B) through
Washer (12C) and into Deck Hole. From underneath deck, secure Hose Guide (12B)
by screwing Locknut (12J). Be sure Guide Holder (12A) is centered and facing forward
before final tightening.
4
12D
12B
12C
12F
12E
12G
12H
12J