Room Unit Design - Nibe RMU S40 Installer Manual

INSTALLATION WITH REAR PANEL
1. Screw the rear panel onto the wall using 2 screws.
Connect RMU S40 to the main product, see section
2.
"Electrical connection".
Angle the display unit and secure the unit to the two
3.
clamps at the bottom of the rear panel.
Press RMU S40 firmly to the top of the rear panel.
4.
18

Room unit design

AA4
X1
AA4 Display unit
AA32 Space for memory card (Micro-SD)
X1 Terminal block, communication and voltage
X5 Power supply, Micro-USB
SF1 On/Off button (Switch)
Designations according to standard EN 81346-2.
AA32
SF1
X5
NIBE RMU S40 | GB