Gigabyte H261-Z60 User Manual page 13

Expansion Slots Per node:
Š
Š
Š
Total:
Š
Š
Š
Video
Š
Š
Š
Š
Š
Storage Per node:
(H261-Z60)
Š
or
Š
Total:
Š
Š
Per node:
(H261-Z61)
Š
Total:
Š
Š
Per Node:
Internal IO
Š
Š
Š
Š
Š
Š
Š
Š
2 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus) from CPU_0
1 x OCP mezzanine slot with PCIe Gen3 x16 bus from CPU_0
2 x M.2 slots from CPU_0 and CPU_1:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 120W if using M.2 device
8 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus) from CPU_0
4 x OCP mezzanine slots with PCIe Gen3 x16 bus from CPU_0
8 x M.2 slots from CPU_0 and CPU_1:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 120W if using M.2 device
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Management chip in CMC board:
Integrated in Aspeed® AST2520A2-GP
6 x 2.5" SATA hot-swappable HDD/SSD onboard SATA ports
4 x 2.5" SATA /SAS hot-swappable HDD/SSD with SAS RAID Card
24 x 2.5" hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
2 x 2.5" U.2, 4 x SATA/SAS hot-swappable HDD/SSD bays
8 x 2.5" U.2, 16 x SATA/SAS hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
2 x M.2 slots
1 x COM header
1 x TPM header
1 x BMC SGPIO header
1 x JTAG BMC header
1 x PLD header
1 x Clear CMOS jumper
1 x IPMB connector
- 13 - Hardware Installation