Advertisement
Proventia Setup Assistant
© Copyright IBM Corporation 2007, 2009. Produced in the United States of America. All Rights Reserved. IBM and the IBM logo are trademarks or
registered trademarks of International Business Machines Corporation in the United States, other countries, or both. Ahead of the threat, Proventia,
SiteProtector, X-Force and X-Press Update are trademarks or registered trademarks of Internet Security Systems, Inc. in the United States, other
countries, or both. Internet Security Systems, Inc. is a wholly-owned subsidiary of International Business Machines Corporation. Other company, product,
and service names may be trademarks or service marks of others. Specifications and content are subject to change without notice.
Part Code # DOC-QSD-MX-4006-002
Troubleshooting My Connection
If the setup utility does not start, make sure your cabling
conforms to the diagram shown here:
ETH1 (WAN)
Red crossover cable
ETH0 (LAN)
If the setup utility does not start, do the following, and
then try to connect to the https://192.168.200.1:8001
address again.
1. Select Start > Connect To > Show All Connections >
Local Area Connection.
2. Click the "Properties" button.
3. Double-click Internet Protocol (TCP/IP). If any of the
fields are populated with information, your network is
configured to use Static IP addresses. Record these
settings for future use and select the options "Obtain an
IP address automatically" and "Obtain DNS server
address automatically."
Need Help or Documentation?
The Policy Configuration Guide and Deployment Guides for IBM
Proventia Network Multi-Function Security are available at the
IBM Internet Security Systems Customer Support Web site:
http://www-935.ibm.com/services/us/iss/support
Advertisement
