Maintenance - Flex FX2231 Operator's Manual

WARNING
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
WARNING
personnel may result in misplacing of internal
wires and components which could cause a
serious hazard. We recommend that all tool
service be performed by a FLEX Factory Service
Center or Authorized FLEX Service Station.
GENERAL MAINTENANCE
WARNING
parts. Use of any other parts could create a
hazard or cause product damage. Periodically
inspect the entire product for damaged, missing,
or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or
damaged parts are replaced. Please contact
WARNING
Splinter Guard
Chip Guard
Cover Plate
Dust Collection Port
Hex Wrench

MAINTENANCE

To avoid serious personal
injury, always remove the
Preventive maintenance
performed by unauthorized
When servicing, use only
identical replacement
ACCESSORIES
The use of any other accessories not specified in this manual
may create a hazard.
customer service or an authorized service
center for assistance.
WARNING
compressed dry air. Always wear safety
goggles when cleaning tools with
compressed air. Ventilation openings and
switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by
inserting pointed objects through openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
-21-
CLEANING
The tool may be cleaned
most effectively with
Certain cleaning agents
and solvents damage
STORAGE