Table of Contents
Advertisement
- - - - - - - - - - - - - - - S E C T I O N C
CAPACITIES (continued)
3230
3430/3930
4630
5030
•Constant Mesh Transmission
U.S. Gals.
3.2
(8 x2)
Imp. Gals.
2.6
Liters
12.0
Shuttle Shift Transmission
U.S. Gals.
2.5
2.5
2.5
(8 x 8)
Imp. Gals.
2.0
2.0
2.0
Liters
9.4
9.4
9.4
Shuttle Shift Transmission
U.S. Gals.
2.2
2.2
2.2
(16
x
8)
Imp. Gals.
1.85
1.85
1.85
Liters
8.4
8.4
8.4
**Rear
Axle/Hydraulic System
U.S. Gals.
12.0
(with 8 x 2 transmission)
Imp. Gals.
10.0
Liters
45.7
••Rear Axle/Hydraulic System
U.S. Gals.
.8.5
(with 8 x 8 or 16 x 8
Imp. Gals.
7.2
trammission)
Liters
32.S
Front Wheel Drive Front Hubs
U.S. Qts.
1.0
(Quantity
shown is for one
Imp. Pts.
1.6
bub only)
Liters
0.9
Front Wheel Drive
U.S. Qts.
5.8
Differential Case
Imp. Pts.
9.7
Liters
5.5
Hydrostatic Steering System
U.S. Qts.
2.3
Imp. Pts.
3.8
Liters
2.2
Belt
Pulley
(where fitted)
U.S. Qts.
0.6
0.6
1.2
1.2
Imp.
Pts.
1.0
1.0
2.0
2.0
Liters
0.57
0.57
1.13
1.13
•With reduction (creeper) gears installed, the transmission oil fill is increased by 3.3 U.S.
Qts.,
5.S Imp.
Prs. (3 Liters).
**With the four wheel drive option, increase
the
rear axle oil by 1.5 U.S. Qts., 2.5 Imp. Pts. (1.4 Liters).
The
four wheel drive transfer case is lubricated by oil from the rear axle.
NOTE: When operating remote cylinders, the rear axle oil level will be affected. When topping
up
the rear
axle
to
accommodate the oil requirement
of
remote cylinders, no more than 6.0
U.S.
Gals., 5.0 Imp. Gals.
(22.7 Uters) should be added to bring the oil level up to the upper mark on the dipstick when all rams are
fully
extended. Alternatively, remote cylinders with an oil capacity
of
up to 7.2
U.S.
Gals., 6.0 Imp. Gals.
(27.7 Uters)
may
be connected to the tractor hydraulic system without adding oil, provided the tractor is
being operated on level ground.
9
Hide quick links:
Advertisement
Table of Contents
