Dupont WFPT100 Series Installation Manual

PITCHER CARTRIDGE REPLACEMENT GUIDE
TRADITIONAL
PITCHER
Model Series WFPT100

Installation

Soak Cartridges

Using one tall water glass for each cartridge, soak the cartridges
upright in cold tap water for 15 minutes. Your cartridges are
packed dry to preserve the carbon freshness. Soaking the
cartridges will activate the carbon and prepare the cartridges
for use. You may need to use weights to keep the cartridge
submerged during this step.

Flush Cartridges

After the cartridges have soaked for 15 minutes, flush the
cartridges by holding them upright under cold running tap water
for 15 seconds.

Drain Excess Water

Allow excess water to drain completely from each cartridge.
www.waterfiltration.DuPont.com
MIRAGE
PITCHER
Model Series WFPT200
Information & Assistance
Protect Plus, LLC Hickory, NC 28601 USA

1
VISTA
PITCHER
Model Series WFPT075
866-709-2086
Toll Free
For Service Requests
& Product Information
800-441-7515
For Safety &
Health Questions
V4.5