SPARK ARRESTER
Refer to the Safety Precautions on page 50.
The exhaust system spark arrester must be
purged of accumulated carbon periodically
(see Maintenance Schedule for servicing
period, page 53).
The exhaust system becomes very hot
during operation and remains hot for a
period of time after stopping the engine.
Allow the exhaust system to cool before
performing this operation.
(3)
(2)
(1)
(1) Bolts
(2) Spark arrester
68
1. Remove the bolts (1), the spark arrester
2. Use a brush to remove carbon deposits
3. Install the spark arrester and the gasket
(4)
(3) Gasket
(4) Muffler
(2), and the gasket (3) from the muffler
(4).
from the spark arrester screen. Be
careful to avoid damaging the spark
arrester screen. The spark arrester must
be free of breaks and holes. Replace, if
necessary. Check the gasket. Replace, if
necessary.
in the muffler and tighten the bolts
securely.