Front Seat
Prongs
Ignition key
Removing & Installing Body Components
#
Removal
Insert the ignition key into the seat lock,
1.
and turn it counterclockwise.
Pull the front seat forward and up.
2.
#
Installation
Insert the front and rear prongs into the
1.
front and rear stays on the frame.
Push back and down on the front of the
2.
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The front seat locks automatically when
closed. Take care not to lock your key in the
Stays
under seat compartment.
Front Seat
u
79