Installation; Location; Mounting And Connections - Cobra 19ULTII How To Use Manual

19.ULTRA.MANUAL.qx 9/15/97 4:09 PM
Plan the location of the transceiver and microphone bracket before start-
ing the installation. Select a location that is convenient for operation and
does not interfere with the driver or passengers in the vehicle. In auto-
mobiles, the transceiver is usually mounted to the underneath of the
dash panel, with the microphone bracket beside it.
The transceiver is held in the universal mounting bracket by two thumb
screws, permitting adjustment at the most convenient angle.
A universal mounting bracket is supplied along with self tapping
screws and star washers. The mounting must be mechanically strong
and also provide a good electrical connection to the chassis of the vehi-
cle. To mount the transceiver:
1.
Determine the most convenient location in your vehicle. Hold the
COBRA radio with mounting bracket in the exact location desired. If
nothing will interfere with mounting it in the desired position,
remove the mounting bracket and use it as a template to mark the
location for the mounting screws.
2.
Drill necessary holes and secure mounting bracket in location.
Page 8

Installation

Location

Mounting Connection
4