Table of Contents
Advertisement
You can add a product you want to connect to by selecting it manually or by selecting "Scan nearby".
• Select manually: Samsung > Air conditioner > System air conditioner
• Scan nearby: [System a/c] Samsung
Select
2. Connecting the SmartThings app to your product
• Follow the instructions displayed on the SmartThings app to connect to your product.
• For information on how to use the SmartThings app, select the How To menu on the app.
• If any pop-window appears on the top of the smartphone while connecting to your product, do not
select it.
NOTE
• If a pop-up window saying that the device is already registered appears during connecting to your
product.
• If a Samsung account-related country error occurs during connecting to your product, log out of
your current Samsung account, log in to your previous Samsung account, and then delete all
devices that have been connected previously. Then, log in to your current Samsung account again,
• If a failure message appears while adding a device, see "Setting up and connecting to a Wi-Fi access
point using your smartphone" on page 13. The connection may fail temporarily due to an
installation location problem of the access point or other problems.
• If the number of added indoor units is incorrect after adding devices, run the tracking again and
then try adding the devices again.
• For security protocols for wireless/wired access points, WPA-PSK and WPA2-PSK are recommended.
Wi-Fi non-standard authentication methods are not supported.
• If your Internet service provider permanently have registered the MAC address (a unique
Internet. Contact your Internet service provider and ask how to connect devices other than your PC
Add
Select
Add device
Select
Select
15
Advertisement
Table of Contents
