Air conditioner User & installation manual Wi-Fi Kit 2.0 MIM-H04UN • Thank you for purchasing this Samsung Product. • Before operating this unit, please read this manual carefully and retain it for future reference.
Downloading the SmartThings app and registering your Samsung account ......18...
California Proposition 65 Warning (US) Cancer and Reproductive Harm - www.P65Warnings.ca.gov. This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air conditioners. Read the installation manual thoroughly before installing the Wi-Fi Kit.
Safety precautions CAUTION • • Do not install the product in a place where it will be exposed to oil or vapor etc. - If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get damaged or product may function abnormally.
Checks before Installation Accessories Wi-Fi Kit User & installation manual • CAUTION • Before installation, be sure to cut off power. • Follow applicable rules for electrical wiring. Make sure that the cables of the Wi-Fi Kit are installed inside a wall or covered to avoid being touched by the occupant. External Dimensions [Unit : mm (inch)] 185 (7.28)
Installing the Wi-Fi Kit Wi-Fi Kit installation • To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are CAUTION potentially interfering elements between them, it may cause problems with the performance of the Wi-Fi Kit that cannot be resolved by customer services.
communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable length. • You can connect up to 16 indoor units to a Wi-Fi Kit. NOTE [Unit : mm (inch)] Indoor unit 10 (0.4) and over 10 (0.4) and over Wi-Fi Kit...
Installing the Wi-Fi Kit Wi-Fi Kit wiring diagram 1) Connecting to a single outdoor unit (F1-F2) R1 R2 <Connection between the Wi-Fi Kit and multiple units> <Connection between the Wi-Fi Kit and a single unit> R1 R2...
2) Connecting to multiple outdoor units (R1-R2) R1 R2 R1 R2 F1 F2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Other controllers (e.g. touch centralized controller, DMS) can be installed together. •...
Installing the Wi-Fi Kit R1 R2 R1 R2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Other controllers (e.g. touch centralized controller, DMS) can be installed together.
Connect the BLK line (black) Connect the ORG line R1 R2 • When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on CAUTION the wall. • Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or •...
Installing the Wi-Fi Kit 6. Activate the Wi-Fi Kit. • When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely. • After the system operates, tracking is performed automatically. 7. Tracking Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi Kit.
1. Install a separate Wi-Fi kit for each group. Example: if you have 3 separate groups/tenants, you must install 3 Wi-Fi kits. • You can connect up to 16 Wi-Fi Kits to a single outdoor unit. • When installing multiple Wi-Fi Kits, connect and perform tracking one by one. CAUTION •...
Installation Manual of the indoor unit. NOTE • To set the tenant address upon request, contact the Samsung service center. • To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are registered to the smartphone.
Checking the Wi-Fi Kit Power LED Wi-Fi connection LED Wi-Fi setting LED AP button Reset button <Front panel of the Wi-Fi Kit> Items on the LED display Item LED indication Wi-Fi connection Wi-Fi setting Initialized General AP connected, Blinking Internet connection incomplete Tracking completed, AP connection incomplete Wi-Fi modem malfunctioning...
Installing the Wi-Fi Kit Initializing the user data • To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the indicators illuminate and the user data is deleted. Updating with a Micro SD card Type Capacity File system...
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.
2. Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app.
• If a pop-up window saying that the device is already registered appears during connecting to your product. • If a Samsung account-related country error occurs during connecting to your product, log out of your current Samsung account, log in to your previous Samsung account, and then delete all devices that have been connected previously.
Starting the system air conditioner app Controlling the air conditioner Below are functions that you can control or monitor using the Wi-Fi adapter. Category Function Description Desired Temp Displays the desired temperature. Current Temp Displays the current temperature. Monitoring Filter warning Defrost Appears in the defrost state.
SmartThings app. To add the process. • If you are using a Samsung smartphone, the server may not be connected temporarily. Turn off and on the power of the Wi-Fi Kit, Adding I found a failure message in...
Is the indicator blinking? app do not Are all LED indicators on the • This indicates a Wi-Fi Kit malfunction. Contact the Samsung operate. Wi-Fi Kit blinking? service center. • The Wi-Fi Kit is not connected to the indoor unit(s) normally.
It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/WIFIKIT_R18_TZ4/seq/0 leads to the download page of the source code made available and open source license information as related to this...
Reference 1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution about 5GHz range radio equipment English may be operated in all EU countries. Spanish French Portuguese equipamento pode ser operado em países da UE.