Checking The Wi-Fi Kit - Samsung MIM-H04U User & Installation Manual

Installing the Wi-Fi Kit
6. Activate the Wi-Fi Kit.
• When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely.
• After the system operates, tracking is performed automatically.
7. Tracking
Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi
Kit. Tracking is required to monitor or control the system air conditioner using the Wi-Fi Kit.
• The Wi-Fi Kit automatically performs tracking when activated. The (
blink while in tracking.
• When any change in the installation of indoor and outdoor units occurs, manually run the tracking by
pressing the (SW3,
• To control indoor units by using a mobile phone, wait until the tracking is completed and then connect
the Wi-Fi Kit to a wireless router.
NOTE
• The (AP) indicator does not turn off until the Wi-Fi Kit is connected to a wireless router after tracking.

Checking the Wi-Fi Kit

Power LED
Wi-Fi connection LED
Wi-Fi setting LED
AP button
Reset button
Items on the LED display
Item
Internet connection incomplete
Tracking completed,
4
AP connection incomplete
Wi-Fi modem malfunctioning
10
- ) button inside the Wi-Fi Kit.
LED indication
Initialized
General
AP connected,
<Front panel of the Wi-Fi Kit>
On
On
On
On
Blinking
) ( ) indicators on the Wi-Fi Kit
Wi-Fi connection
On
On
Blinking
Off
Blinking
Wi-Fi setting
On
Off
Off
Off
Blinking