Advertisement
-
Move the interrupter
-
Position the fixed contact in the interrupter unit.
-
Fasten the fixed contact by expansion
Replace the adsorption
-
Undo the cover (1.B 21) and p-ull out the filter housing (1.8.05).
-
Remove used filter cartridge
insert a new cartridge and replace a complete filter housing.
-
Mount the cover (L8.21)
-
Couple the linkage
-
Connect the SF6 piping at poles A, Band
-
Evacuate the breaker, top up with SF6 to the rated pressure
put ..:it into operat Lon. (The procedure
chapter 4.)
-
Check all flange-ccnnections
leak detector.
unit in end-position
filter (see figure B2)
(1.8.04) from the filter housing,
and fasten the bolts with.> 10 Nm.
opened and the SF6 piping by a SF6
ON.
bolts (chapter 6.2).
C.
is described
in part A,
and
Advertisement
