Advertisement
Torque wrench 150 - 650 Nm
Wrench for thE~
threaded
insert
b) Accessories
(see chapter 3.8)
c) Spare parts (reqLired in addition to 3.8.2)
1.7
Suppcrt porcelain gasket
1.8.15
O-rirg
1.8.33
Pin
1.8.35
O-rirg
1.8.36
O-rirg
This 1 :s:t. de•. ·. not take into
parts (e.g. contacts, insulating rod etc.).
Table
Spare parts list for disassembling
89:
column
Procedure
Proceed
as
descri bed
contacts", up to:
Pullout
the complete interrupter unit.
-
Remove the lower support of contact
-
Undo the support )orcelain (1.6) at the lower flange (figure B1,
item F) and 1ift it off.
Undo the threaded insert (1.8.03) of the opening spring (1.8.06,
figure 82). Use the special wrench.
-
Remove the opening spring from the crank case.
3.0 kg
4.0 kg
the replacement of separate
a~c.uunt
in the
chapter
renewa 1 of
I I
(1.5, figure Bl, item
--
the complete pole
the
arc ing-
E).
Advertisement
