GPON Repeater Operation Manual
After truned on the power, there is boot information printing. After startup, press enter and input username
and password to login.
Notice:
The default username and password of CLI both are admin. For example,
Login: admin
Password: admin
7.2. Main Console Commands:
1. get device info
//get the device information
2. get onu_module 0
//get the first channal ONU module working status
3. get olt_module 0
//get the first channal OLT module working status
4. get onu_module 1
//get the second channal ONU module working status
5. get olt_module 1
//get the second channal OLT module working status
6. set pn xxxxx
//change PN number
7. get alarm info
//checking current alarms
8. set bypass-on/off //set the bypass function enable or disable
9. system config factory //restore to defaut setting
10. system config save
Copyright © 2018 Shanghai Baudcom Communication Device Co.,Ltd.
//save configuration
Chapter 6 Precautions
All Rights Reserved.
20 / 18